NEW! GS-38 is a large and powerful grain cart, adapted to serve one to two 35-50’’ combines in operation. It is easy to drive and operate.

grain cart gs-38 with john deer harvester

GS-38 is our top performing grain cart with a complete new design. Emptying this powerful grain cart in the bottom is done in less than 40 seconds, overloading to grain cart is around 3 minutes. It is fitted with a forced steering that saves wear and tear on axles, rims and tires, airbrakes as standard, the largest gearbox on the market, hydraulic tarpas and a complete new design of the unloading with massive augers. Apart from all the outstanding components from the GS-series developed in the past such as excellent visibility, a bolted construction and no welding, split compartment for fertilizer and seed handling, foldable auger.

GS-38 works well with a tractor at approximately 300-400 hp. With such a tractor, slopes and gradients will not set down the driving speed, making it smooth for the grain cart to operate and readily deliver the grain from the fields to the unloading place efficiently. However, in flat fields a 250 hp tractor is sufficient. The discharge time is approx. 3 – 4 minutes depending on grain and moisture content.

The grain cart is constructed with a horizontal and vertical auger, reducing problems of unloading even in wet conditions. As a standard, it is delivered with a suspended drawbar and an up and down moving discharge pipe (unloading down to 2.26 m and up to 4,7 m loading height) which can operate seed and fertilizers to most of the fertilizer spreaders and many of the seeders found on the market. Furthermore, it can be equipped with an indicator for the opening and closing of the tailgate, hydraulically opened bottom hatches and tip the fully load in about 30-40 second. The GS 38 is equipped as standard with roll-top, rear platform, ladders inside and outside, mudguards and hydraulic legs. The machine is also fitted as standard with good lights on the auger.

The machine is delivered with BPW tridem tandem axle with hydraulic suspension and forced steering as standard, air brakes and standard size of tyres is 710/50R26,5.

loader-icon

Compare grain carts

Capacity - min. 38 m3
Capacity – max. (w. extension 30 cm) 41 m3 (extension 15 cm)
Gross weight 40 ton
Axle type BPW tridem
Brake system Air brakes
Standard wheels 710/55R26,5
Option tires on request
Hp requested 300-400 *
Foldable front auger
Unloading height - min.@meter 2,24 m
Unloading height - max. 4,66 m
Auger diameter - horizontal 500 mm
Auger diameter - vertical 600 mm
Discharge time (auger) 3 -4 min**
Discharge time (bottom hatches) 40 sec**
Transmission mechanical
Hydraulic bottom hatch opening - full
Split compartment (fertilizers/seeds - separate discharge)
Hydraulic support leg
Suspended drawbar
Roll-top suitable for transport
Plattform rear
Ladder inside and out
Digital weighting system
Mudguards
Bottom hatch indicator
Large front window
Rear drawbar
Worklight w. switch
Choice of color
Length overall 11250 mm
Total width without tires 2.550 mm
Total width incl tires 2883 mm
Total height - standard 3839 mm
- with extensions 3980 mm
Empty weight 10500 kg

● Standard ○ Option

* Depending on field slope and moisture level in field

** For standard grain (15-18% moisture)

*** The highest point of the auger can be lowered for about 100 mm