GS 12 is an efficient overloading grain cart in a compact format. A sturdy overloading wagon designed with many years of experience from the larger Grain Saver trailers. Perfect for alpine areas, Nordic areas and smaller operations where efficiency and technical solutions is in focus. Serves easily a medium combiner.
GS 12 overloading grain cart works well with a tractor at approximately 100-120 hp. With such a tractor, slopes and gradients will not set down the driving speed, making it smooth for the grain cart to operate and readily deliver the grain from the fields to the unloading place efficiently. In even fields an 80-100 hp tractor will be suitable.
The GS12 is the grain cart that tends to give the highest capacity increase for the owner. Often it is reported more than a 100% capacity increase on the combine. This is related to the fact that it is operated in areas where the land lots are small and in field distribution time is long.
It is also a perfect tractor for many emerging markets with a plentiful of cheap low hp tractors are in abundance. Where the GS12 make a perfect match.
The grain cart is constructed with a horizontal and vertical auger, reducing problems of unloading even in wet conditions. As a standard, it is delivered with an up and down moving discharge pipe (unloading down to 2.06 m loading height) which readily can operate seed and fertilizers to most of the fertilizer spreaders and seeding machinery found on the market. Furthermore, it is equipped with an indicator for the opening and closing of the tailgate, hydraulically opened bottom hatches, roll-top, rear platform, ladders inside and outside and mudguards. The machine can be fitted as with good lights on the unloading auger. The machine is delivered with a BPW single axle (choice of hydraulic or air brakes) and tyres 710/65R26,5.
|Capacity - min.||12 m3|
|Capacity – max. (w. extension 30 cm)||12 m3|
|Gross weight||12 ton|
|Axle type||BPW single axle|
|Brake system||Hydraulic/air brakes|
|Hp requested||80-110 *|
|Foldable front auger||○|
|Unloading height - min.@meter||2,06 m|
|Unloading height - max.||4,2m|
|Auger diameter - horizontal||250 mm|
|Auger diameter - vertical||315 mm|
|Discharge time (auger)||2 -3 min**|
|Discharge time (bottom hatches)||40 sec.**|
|Hydraulic bottom hatch opening - full||●|
|Split compartment (fertilizers/seeds - separate discharge)||○|
|Hydraulic support leg||not possible|
|Suspended drawbar||not possible|
|Roll-top suitable for transport||●|
|Ladder inside and out||●|
|Digital weighting system||○|
|Bottom hatch indicator||●|
|Large front window||●|
|Rear drawbar||not possible|
|Worklight w. switch||●|
|Choice of color||○|
|Length overall||5.000 mm|
|Total width without tires||2.540 mm|
|Total width incl tires||2.800 mm|
|Total height - standard||3.440 mm***|
|- with extensions||3.593 mm|
|Empty weight||3.200 kg|
● Standard ○ Option
* Depending on field slope and moisture level in field
** For standard grain (15-18% moisture)
*** The highest point of the auger can be lowered for about 100 mm