GS 16.5 is a grain cart adapted to serve one mid-sized combine or two smaller sized combines in operation. It is available as single axle or boogie version

It is compact and fitted with a standard BPW axle. Because it is built on the same components as it larger brother – the GS 24.5 – unloading time is approx. 2-3 minutes.

Grain Saver grain cart gs-16,5

The GS 16.5 works well with a tractor at approximately 150 – 180 hp. With such a tractor, slopes and gradients will not set down the driving speed, making it smooth for the grain cart to operate and readily deliver the grain from the fields to the unloading place efficiently. However, in flat fields a 100-120 hp tractor is sufficient.

The grain cart is constructed with a horizontal and vertical auger, reducing problems of unloading even in wet conditions. As a standard, it is delivered with a suspended drawbar and an up and down moving discharge pipe (unloading down to 2.26 m and up to 4,5 meter loading height) which can operate seed and fertilizers to most of the fertilizer spreaders and many of the seeders found on the market. Furthermore, it can be equipped with an indicator for the opening and closing of the tailgate, hydraulically opened bottom hatches and tip the fully load in about 40 second. The GS 16,5 is equipped as standard with roll-top, rear platform, ladders inside and outside, mudguards and hydraulic legs. The machine is also fitted as standard with good lights on the auger.

The machine is delivered with BPW steerable tandem axle (choice of hydraulic or air brakes) and standard tyres 710/50R26,5 The GS 16,5 can be fitted with single or dual axle system. GS 16,5 is made only to order.


Compare grain carts

Capacity - min. 16,5 m3 16,5 m3
Capacity – max. (w. extension 30 cm) 19,5 m3 19,5 m3
Gross weight 17 ton 17 ton
Axle type BPW single axle (14 ton) BPW tandem (14 ton)
Brake system Hydraulic/air brakes Hydraulic/air brakes
Standard wheels 710/65R30,5 710/55R26,5
Option tires on request on request
Hp requested 120-175 * 120-175 *
Foldable front auger
Unloading height - min.@meter 2,24 m 2,24 m
Unloading height - max. 4,66 m 4,66 m
Auger diameter - horizontal 330 mm 330 mm
Auger diameter - vertical 420 mm 420 mm
Discharge time (auger) 2 -3 min** 2 -3 min**
Discharge time (bottom hatches) 40 sec** 40 sec**
Transmission mechanical mechanical
Hydraulic bottom hatch opening - full
Split compartment (fertilizers/seeds - separate discharge)
Hydraulic support leg
Suspended drawbar
Roll-top suitable for transport
Plattform rear
Ladder inside and out
Digital weighting system
Bottom hatch indicator
Large front window
Rear drawbar
Worklight w. switch
Choice of color
Length overall 6.701 mm 6.701 mm
Total width without tires 2.150 mm 2.150 mm
Total width incl tires 2.904 mm 2.926 mm
Total height - standard 3.800 mm*** 3.800 mm***
- with extensions 3.900 mm 3.900 mm
Empty weight 5.920 kg 5.920 kg

● Standard ○ Option

* Depending on field slope and moisture level in field

** For standard grain (15-18% moisture)

*** The highest point of the auger can be lowered for about 100 mm